Fix it now
These are enrolment error codes that report the state of your tenant account, not the state of anything on the PC. 0x80043003 means the account is deleted. 0x80043002 means it is in maintenance mode. 0x80cf0440 means the trial or paid account is suspended. No client-side work moves any of them.
- In the Microsoft 365 admin centre open Billing, Your products and read the status and the renewal or expiry date beside the subscription.
- If it reads expired, disabled or deleted, reactivate or renew it. Nothing done on a device helps until it is active again.
- Note where you are in the lifecycle: 30 days expired with normal access, then 90 days disabled with admin-only access to data, then deletion.
- If billing is healthy, open Users, Active users, select the user and confirm a licence is assigned with the relevant service plan switched on.
- Only then retry enrolment on the device, and read the enrolment log rather than assuming the code has changed.
A deleted subscription cannot be recovered by buying a new one of the same type after the data retention period ends.
If enrolment now completes you can stop here. If not, the next section explains where these codes come from and what each one is reporting.
Why it happens
These five codes come from Microsoft’s device-enrolment error table, and they are worth taking literally because the client is not describing itself – it is repeating what the service told it about the account behind the request. That is why every client-side remedy fails: there is nothing wrong with the client.
Microsoft publishes them in pairs. 0x80043002 and 0x80CF3002 both mean “Account is in maintenance mode”, with the note that new client computers cannot be enrolled while it is. 0x80043003 and 0x80CF3003 both mean “Account is deleted”, with the remedy “verify that your account and subscription is still active”. 0x80cf0440 stands alone: the client-facing text is “The connection to the service endpoint terminated”, and the documented cause is that the trial or paid account is suspended.
The word people expect to see – expired – is not what any of them says, and the difference matters operationally. An expired subscription still works: Microsoft’s lifecycle gives you 30 days of Expired status during which users keep normal access to files and applications and an administrator can reactivate. Only after that does it move to Disabled for 90 days, where users cannot access services and administrators can reach the data to back it up but cannot assign licences. After that it is deleted, and the data goes with it.
So a tenant showing these codes is already past the first stage. That reframes the ticket: this is not “a PC will not enrol”, it is “the organisation’s subscription has lapsed far enough to stop working, and somebody needs to look at billing today rather than this month”.
The subscription has been suspended
You have this one if 0x80cf0440, and Billing, Your products shows the subscription as disabled or in a suspended state.
- Reactivate the subscription from Billing, Your products in the Microsoft 365 admin centre.
- Resolve whatever suspended it – usually a failed payment method or an expired card.
- Retry enrolment once the subscription shows as active.
Suspension is a billing state. Support cannot lift it while the underlying payment problem stands.
The account has been deleted
You have this one if 0x80043003 or 0x80CF3003, and the subscription is no longer listed as active at all.
- Check Billing, Your products including inactive and expired subscriptions.
- If the subscription is within the recovery window, reactivate it rather than buying a new one – reactivation restores what was there.
- If it has passed the retention period, understand that data is gone and a new subscription of the same type does not bring it back.
There is a real deadline here. Microsoft retains data through Expired and Disabled, then deletes it. Find out which stage you are in before deciding anything.
The account is in maintenance mode
You have this one if 0x80043002 or 0x80CF3002, and existing devices work while new enrolments fail.
- Check the subscription state and any service health advisories against the tenant.
- Wait for the maintenance state to clear rather than making changes underneath it.
- Retry enrolment afterwards; existing managed devices are not affected.
The subscription is fine and the user is not licensed
You have this one if Billing shows an active subscription, but the specific user has no licence or has the relevant service plan switched off.
- Open Users, Active users, select the user and check the Licenses and apps tab.
- Confirm the service plan the workload needs is enabled inside the assigned licence, not just that a licence exists.
- Allow time for the assignment to propagate before retesting.
Full reference
What each code reports
| Code | Published meaning | Documented remedy |
|---|---|---|
0x80043002, 0x80CF3002 |
Account is in maintenance mode | New client computers cannot be enrolled; check your account settings |
0x80043003, 0x80CF3003 |
Account is deleted | Verify that your account and subscription are still active |
0x80cf0440 |
The connection to the service endpoint terminated | Trial or paid account is suspended; create a new trial or paid account and re-enrol |
The lifecycle you are somewhere inside
| Stage | Duration | Users | Administrators | Data |
|---|---|---|---|---|
| Expired | 30 days | Normal access to services, files and apps | Can reactivate from the admin centre | Fully accessible |
| Disabled | 90 days | No access; apps show unlicensed product notifications | Admin centre access, but cannot assign licences | Accessible to administrators for backup |
| Deleted | Terminal | No access | Admin centre remains for other subscriptions | Deleted |
Microsoft also notes that from 9 February 2026 the Expired stage no longer applies to licence-based subscriptions bought directly through a Microsoft Customer Agreement, so check which agreement your subscription sits under rather than assuming the 30-day cushion is there.
The order to work in
- Billing, Your products – subscription status and dates. This is the only thing that matters until it is green.
- Users, Active users – licence assigned to the affected user.
- The licence’s service plans – the specific workload switched on inside it.
- The device’s enrolment log – and only now, because until the three above are right the log will keep saying the same thing.
- Retry, and read the new code rather than assuming it is the old one.
What to do while it is disabled
- Back up what matters. During the Disabled stage administrators can still reach the data, and that window closes.
- Do not delete users to reduce a bill. Deleting a user during a lapse compounds the recovery problem.
- Do not buy a different subscription hoping to inherit the data. Reactivating the original is what restores it; a new subscription of the same type does not.
- Record which SKU the users were on before, so the renewal restores exactly what they had rather than something approximate.
- Tell the affected users. Applications showing unlicensed product notifications generate a helpdesk queue that nobody can close.
Where these codes turn up
They are enrolment codes, so the natural place to see them is a device that will not enrol or a client that will not complete setup. If you are seeing something that looks like a licensing failure inside a desktop Office application instead, that is a different family of codes with different remedies, and the account state is only worth checking here first because it is fast and because it makes every other investigation pointless if it is wrong.
When a licence is the actual fix
When the admin centre says the subscription is suspended, disabled or deleted, the licence genuinely is the fix and nothing done on a client substitutes for it. Reactivate the existing subscription rather than buying a replacement wherever the recovery window allows it – reactivation restores the tenant’s data and settings, and a fresh subscription of the same type does not. Where a genuine repurchase is needed, Microsoft 365 Business Premium is the usual landing place for a small organisation in this position, because it carries the desktop applications, the hosted mail and the device management they were relying on before the lapse. Note the deadline: during the Disabled stage administrators can still reach the data, and after that it is deleted. Arco can check which SKU your users were previously on so the renewal restores exactly what they had, and supply the seats you actually need rather than a round number.
Every code this article covers
| Code | What it points at | Source |
|---|---|---|
0x80043003 |
“Account is deleted.” Verify that your account and subscription are still active | Microsoft Learn |
0x80CF3003 |
Published in the same row as 0x80043003 with the identical meaning: the account is deleted | Microsoft Learn |
0x80043002 |
“Account is in maintenance mode.” New client computers cannot be enrolled while the account is in maintenance mode | Microsoft Learn |
0x80CF3002 |
Published in the same row as 0x80043002 with the identical meaning: the account is in maintenance mode | Microsoft Learn |
0x80cf0440 |
“The connection to the service endpoint terminated.” The documented cause is that the trial or paid account is suspended | Microsoft Learn |
Confirm the fix worked
- Billing, Your products shows the subscription as active with a future renewal date.
- The affected user holds a licence with the required service plan enabled.
- Enrolment on the device completes without returning any of the five codes.
- Existing users report their applications no longer showing unlicensed product notifications.
- You have recorded which stage of the lifecycle the tenant was in, so the same lapse is not repeated silently.
Questions people ask about this
Does 0x80043003 mean my subscription expired?
Not quite, and the difference matters. Microsoft publishes it as “Account is deleted”. Expiry is an earlier stage of the lifecycle during which users keep working normally for 30 days. If you are seeing this code, the tenant is further along than expiry.
Will reinstalling or repairing the client help?
No. These codes report the state of the account at the service, not the state of anything on the machine. Until Billing shows an active subscription, every client-side action produces the same result.
How long do we have to recover the data?
Microsoft’s documented lifecycle gives 30 days of Expired with normal access, then 90 days of Disabled during which administrators can reach the data to back it up. After that the data is deleted and a new subscription of the same type does not recover it.
Can we just buy a new subscription?
You can, but it does not restore what was there. Reactivating the original subscription is what brings back the tenant’s data and settings. Buy new only when the recovery window has genuinely closed.
Existing devices work but new ones will not enrol. Which code is that?
That pattern fits 0x80043002 or 0x80CF3002 – the account is in maintenance mode, which specifically blocks enrolling new client computers while leaving existing ones alone.
