Fix it now
0x80D01001 is DO_E_NO_SERVICE: Delivery Optimization was unable to provide the service. It is not a stalled transfer, which is a different code in the same family. Something is stopping the client reaching the Delivery Optimization cloud service or its content sources.
Get-DODownloadMode
Get-DeliveryOptimizationStatus
Set-DODownloadMode -DownloadMode 0
Restart-Service DoSvc
- Retry the download from Windows Update. If it works with peering off, the peer path was the problem and the next section covers the ports.
- If it still fails, the client cannot reach Microsoft’s content or cloud endpoints at all. Check the firewall for 443 outbound to the Delivery Optimization service, and check what the system account uses for a proxy with
netsh winhttp show proxy. - Ask whether TLS inspection is in the path. Microsoft states plainly that TLS inspection breaks the connection to the Delivery Optimization service because of certificate pinning, so the endpoint has to be excluded rather than inspected.
- Clear a stuck cache before the next attempt with
Delete-DeliveryOptimizationCache -Force.
Do not set download mode 100. Microsoft deprecated Bypass starting in Windows 11 and says configuring it can cause content to fail to download, with 0x80D03002 as one result.
If the download completes, you are done. If not, the next section explains the two places the client can fail and which code belongs to each.
Why it happens
Delivery Optimization is a separate download service, DoSvc, that Windows Update hands its content requests to. Before it fetches anything it talks to a cloud service to register the job and find out whether peers are available. Then it pulls content from some combination of Microsoft’s content delivery network over HTTPS, a Microsoft Connected Cache server, and peers on the local network or the internet, depending on the download mode in force.
0x80D01001 is DO_E_NO_SERVICE: Delivery Optimization was unable to provide the service. That is a different statement from the one people usually attach to it. A transfer that saw no progress within the defined period is 0x80D02002, DO_E_DOWNLOAD_NO_PROGRESS, and confusing the two sends you to look at bandwidth when the problem is reachability, or the other way round.
The pause codes are also routinely swapped. 0x80D03805 is DO_E_BLOCKED_BY_NO_NETWORK, which Microsoft describes as Delivery Optimization pausing the job due to loss of network connectivity. 0x80D03801 is DO_E_BLOCKED_BY_COST_TRANSFER_POLICY: it paused the job due to cost policy restrictions, which is what a metered connection produces. One is a missing network, the other is a network the client has been told is expensive.
0x80D03002 is DO_E_NO_DOWNLOAD_EXTSETTINGS: the download job is not allowed due to user or admin settings. That one points at configuration rather than at the network, and Microsoft names a specific configuration that causes it. Download mode 100, Bypass, is deprecated starting in Windows 11, and the documentation says not to configure it because it can cause some content to fail to download. If you inherited an estate with mode 100 set, that is where to start.
The Delivery Optimization cloud service is unreachable
You have this one if The failure is identical on every machine at one site, and Get-DeliveryOptimizationStatus shows no usable job.
- Confirm the machine can reach
*.do.dsp.mp.microsoft.comover HTTPS on 443, which is the documented Delivery Optimization service endpoint. - Exclude that endpoint from TLS inspection. Microsoft’s own note against it is that TLS inspection will break this connection due to certificate pinning.
- Check what the system account uses for a proxy with
netsh winhttp show proxy, because it is not the browser’s setting. - Restart DoSvc and retry.
Delivery Optimization switches to Simple mode automatically when the cloud services are unavailable or unreachable. Setting mode 99 by hand does not restore reachability; it only makes permanent what the client already does on its own.
Peer traffic is blocked so there is nowhere to fetch from
You have this one if Setting download mode 0 makes the problem disappear immediately.
- Decide whether you want peering at all. On a small site with fast internet, mode 0 is a legitimate permanent answer.
- If you do want it, allow TCP 7680 for peer content sharing, and UDP 3544 for Teredo if you are using Group or Internet mode.
- Confirm no host firewall rule or endpoint protection policy is stopping dosvc listening.
- Set the mode you actually want with
Set-DODownloadMode, restart DoSvc, and confirm withGet-DODownloadMode.
A proxy or inspection appliance is breaking the transfer
You have this one if HTTP bytes climb briefly then stop, or the same content downloads through a browser but never through the update client.
- Read the system account’s proxy with
netsh winhttp show proxy. - If it is wrong, import the working configuration with
netsh winhttp import proxy source=ie, or clear it withnetsh winhttp reset proxy. - Exempt the Delivery Optimization and content endpoints from TLS inspection.
- Confirm the proxy passes byte-range requests intact rather than collapsing them into whole-file requests.
Policy or cost settings are blocking the job
You have this one if 0x80D03002 or 0x80D03801, on one machine while identical machines on the same network are fine.
- Check whether the active connection is set as metered. That is what produces a cost policy pause.
- Check whether download mode is set to 100. Bypass is deprecated in Windows 11 and Microsoft says configuring it can cause content to fail to download.
- Review the Delivery Optimization policies under Computer Configuration – Administrative Templates – Windows Components – Delivery Optimization for bandwidth and cache limits set too low.
- Confirm updates are not paused in Windows Update settings.
The local cache or the service state is stuck
You have this one if One machine fails repeatedly on the same content while other downloads succeed.
- Run
Delete-DeliveryOptimizationCache -Force. - Restart the service with
Restart-Service DoSvc. - If it persists, stop wuauserv and bits, rename
C:\Windows\SoftwareDistribution, restart the services and rescan so the job is created afresh. - Collect detail with
Get-DeliveryOptimizationLogif you need to see which stage failed.
Full reference
The five codes, and which is which
| Code | Published name | What it says |
|---|---|---|
| 0x80D01001 | DO_E_NO_SERVICE | Delivery Optimization was unable to provide the service |
| 0x80D02002 | DO_E_DOWNLOAD_NO_PROGRESS | Download of a file saw no progress within the defined period |
| 0x80D03002 | DO_E_NO_DOWNLOAD_EXTSETTINGS | Download job not allowed due to user or admin settings |
| 0x80D03805 | DO_E_BLOCKED_BY_NO_NETWORK | Paused the job due to loss of network connectivity |
| 0x80D03801 | DO_E_BLOCKED_BY_COST_TRANSFER_POLICY | Paused the job due to cost policy restrictions |
The ports Delivery Optimization actually uses
| Port | Protocol | Purpose |
|---|---|---|
| 7680 | TCP/IP | Peer-to-peer content sharing between devices on the network |
| 3544 | UDP | Teredo NAT traversal to discover and connect to peers across NATs. Required with download mode Group (2) or Internet (3) |
| 443 | HTTPS, TLS 1.2 | Between the Delivery Optimization client and the cloud service, for HTTPS content |
| 67 and 68 | UDP | DHCP client, for DHCP-based groups and cache server discovery |
7680 is TCP, not TCP and UDP. That distinction matters when you are asking a network team for a rule, because a request for both invites the question of why, and the answer is that UDP 3544 is a different requirement for a different purpose. DoSvc also stops listening on 7680 when it is idle, which Microsoft documents explicitly, so a port scan that finds nothing listening is not evidence of a problem.
Download modes, and the one not to use
| Mode | Name | Behaviour |
|---|---|---|
| 0 | HTTP Only | Peer-to-peer caching disabled, but still uses cloud service metadata for a reliable download from the original source or a Connected Cache server |
| 1 | LAN | The default. Peer sharing on the same network |
| 2 | Group | Peering across internal subnets between devices in the same group. Microsoft’s recommended option for most organisations |
| 3 | Internet | Peer sources across the internet |
| 99 | Simple | Cloud services disabled entirely, for offline environments. Delivery Optimization switches to this automatically when the cloud services are unavailable or unreachable |
| 100 | Bypass | Deprecated starting in Windows 11. Microsoft says not to configure it, because it can cause some content to fail to download |
To disable peer-to-peer, use mode 0. To handle a device with no internet access, use mode 99. Neither of those is mode 100, and reaching for Bypass to ‘go back to the old downloader’ is the change most likely to make things worse.
Command reference
| Command | What it does |
|---|---|
Get-DeliveryOptimizationStatus |
Shows active jobs, their state and where the bytes are coming from |
Get-DODownloadMode |
Reports the download mode currently in force |
Set-DODownloadMode -DownloadMode 0 |
Switches to HTTP only, with peering disabled |
Delete-DeliveryOptimizationCache -Force |
Clears cached content so a job restarts cleanly |
Get-DeliveryOptimizationLog |
Produces a readable log of the service’s own activity |
Get-DOConfig |
Shows the effective Delivery Optimization configuration on the machine |
Restart-Service DoSvc |
Restarts the Delivery Optimization service after a change |
Where to look on the machine itself
- Windows 11: Settings, Windows Update, Advanced options, Delivery Optimization, Activity Monitor. Windows 10: Settings, Update and Security, Delivery Optimization, Activity Monitor. Both break the download down by source, which tells you at a glance whether peers are contributing anything.
- Group Policy for Delivery Optimization lives under Computer Configuration – Administrative Templates – Windows Components – Delivery Optimization.
Get-DeliveryOptimizationLogfor the service’s own account of a failed job.- The proxy the system account uses, from
netsh winhttp show proxy. It is not the browser’s setting and the two routinely disagree. - Whether the connection is marked metered, because that alone produces a cost policy pause.
Every code this article covers
| Code | What it points at | Source |
|---|---|---|
0x80D01001 |
DO_E_NO_SERVICE: Delivery Optimization was unable to provide the service | Microsoft Learn |
0x80D02002 |
DO_E_DOWNLOAD_NO_PROGRESS: download of a file saw no progress within the defined period | Microsoft Learn |
0x80D03002 |
DO_E_NO_DOWNLOAD_EXTSETTINGS: download job not allowed due to user or admin settings. Download mode 100 is one documented cause | Microsoft Learn |
0x80D03805 |
DO_E_BLOCKED_BY_NO_NETWORK: Delivery Optimization paused the job due to loss of network connectivity | Microsoft Learn |
0x80D03801 |
DO_E_BLOCKED_BY_COST_TRANSFER_POLICY: Delivery Optimization paused the job due to cost policy restrictions | Microsoft Learn |
Confirm the fix worked
- Start a download and run
Get-DeliveryOptimizationStatus; confirm the byte counters are climbing rather than sitting at zero. - Confirm the update completes in Windows Update without returning a code.
- Run
Get-DODownloadModeand confirm the mode is the one you intended to leave in place. - Open the Delivery Optimization activity monitor in Settings and confirm the sources look as you expect.
- Repeat on a second machine at the same site, to confirm you fixed the network path rather than one client.
Questions people ask about this
Does 0x80D01001 mean the download stalled?
No. 0x80D01001 is DO_E_NO_SERVICE: Delivery Optimization was unable to provide the service. A download that saw no progress within the defined period is 0x80D02002, a different code. Treating them as the same thing sends you to look at throughput when the problem is reachability.
Should I set download mode 99 when the cloud service is unreachable?
There is no need. Microsoft documents that Delivery Optimization switches to Simple mode automatically when the cloud services are unavailable or unreachable. Mode 99 is for genuinely offline environments; to turn peering off on a connected machine, use mode 0.
Can I disable Delivery Optimization completely?
You can stop it peering with mode 0, and use mode 99 on a device with no internet access. Do not use mode 100: Bypass is deprecated starting in Windows 11 and Microsoft says configuring it can cause content to fail to download.
Is there a licence that fixes this?
No, and there is no paid feature involved. Delivery Optimization is part of Windows. The policy controls are easier to apply on editions that give you Group Policy, but the fault itself is a network one and costs nothing to fix.
Why does this only happen behind our proxy?
Most often TLS inspection. Microsoft states that inspecting TLS breaks the connection to the Delivery Optimization service because of certificate pinning, so the endpoint has to be excluded from inspection rather than passed through it.
